| Name: |
Karthik Ramani |
| Title: |
Associate Professor of Mechanical Engineering |
| Degrees: |
Ph.D. in Mechanical Engineering, Stanford University, 1991.
M.S. in Mechanical Engineering, Ohio State University, 1986.
Bachelor of Technology in Mechanical Engineering, Indian Institute of Technology, Madras, India, 1985.
|
| Address: |
School of Mechanical Engineering
Purdue University
West Lafayette, Indiana 47907-1288
Phone: (765) 494-5725; Fax: (765) 494-0539
E-Mail: ramani@ecn.purdue.edu
Home page: widget.ecn.purdue.edu/~mecppl/ |
| EXPERIENCE:
| | 7/97-present | Associate Professor, School of Mechanical Engineering, Purdue University |
| 7/91-7/97 | Assistant Professor, School of Mechanical Engineering, Purdue University |
| Summer 93 | Summer Faculty Intern, Dow Plastics, Advanced Materials |
| 6/87-6/91 | Research Assistant, Design Division, Stanford University |
| Autumn 89 | Teaching Assistant, Mechanical Engineering, Stanford University |
| Summer 89 | Summer Intern, Delco Products, Advanced Composite Systems |
| 9/86-6/87 | Visiting Scholar, Center for Design Research, Stanford University |
| 3/85-8/86 | Research Assistant, Mechanical Engineering, The Ohio State University |
| Spring 85 | Teaching Assistant, Mechanical Engineering, The Ohio State University |
PROFESSIONAL HONORS: | American Men and Women of Science 1997 |
| |
Ruth and Joel Spira Award for Excellence in Teaching, Purdue University 1997 |
| |
Ralph R. Teetor Educational Award, Society of Automotive Engineers 1996 |
| |
National Science Foundation CAREER Award 1996 |
| |
National Science Foundation Research Initiation Award 1993 |
| |
Dupont Young Faculty Award 1992 |
| |
SAMPE Student Award 1991 |
| |
Best Academic Record Award for Junior and Senior Year, Indian |
| |
Institute of Technology, Madras, India, 1984-85 |
TEACHING INTERESTS: | Composites and Polymer Processing, Computer-Aided Design
Materials and Manufacturing Processes
|
| RESEARCH: |
Composites and Polymer Processing, Thermoplastic Polymer Bonded
Systems, Durability of Interfaces, Design of Processing Equipment. |
FIVE RECENT PUBLICATIONS CLOSELY RELATED TO THE PROPOSAL
- Ramani, K., Tagle, J., Devanathan, D., Nazre, A. , Swarts, D., and Lin, S., "Thin-Film Thermoplastic-Metal Joining Process for Titanium to Poly(Etherketoneetherketoneketone)," Polymer Engineering and Science, Vol. 35, No. 24, pp. 1972-1978, 1995.
- Ramani, K., and Tagle, J., "Process Induced Effects in Thin-Film Bonding of PEKEKK in Metal-Polymer Joints, "Polymer Composites, Vol. 17, No. 6, pp. 879-886,1996.
- Ramani, K., and Wenping, Z., 1998, "Evolution of Residual Stresses in Thermoplastics Bonding to Metals," International Journal of Adhesion and Adhesives, Vol. 17, pp. 353-357.
- Ramani, K., and Moriarty, B., 1998, "Thermoplastic Bonding to Metals via Injection Molding for Macro-Composite Manufacture, " Polymer Engineering and Science, Vol. 38, No. 5.
- Ramani, K., Weidner, W., and Kumar, G.,"Silicon Sputtering as a Surface Treatment for Bonding to Metals," International Journal of Adhesion and Adhesives, to appear September, 1998.
FIVE OTHER RECENT PUBLICATIONS
- Ingram, C., and Ramani, K., "The Effect of Sodium Hydroxide Anodization on the Durability of Poly(Etherketoneetherketoneketone) Adhesive Bonding of Titanium," International Journal of Adhesion and Adhesives, Vol. 17, No. 1, pp. 39-45, 1997.
- Ramani, K., Woolard, D.E., and Duvall, M.S., "An Electrostatic Powder Spray Process for Manufacturing Thermoplastic Composite Materials," Polymer Composites, Vol. 16. No. 6, pp. 459-469, 1995.
- Ramani, K., Borgoankar, H., and Hoyle, C.H., "Experiments on Compression Moulding and Pultrusion of Thermoplastic Powder Impregnated Towpregs," Composites Manufacturing, Vol. 6, No. 1, pp. 35-43, 1995.
- Miller, K., and Ramani, K., "Process Induced Residual Stresses in Compression Molded UHMWPE," Polymer Engineering and Science, accepted for publication.
- Duvall, M.S., Ramani, K., Bays, M., and Frederic, C., "In-situ Composite Manufacture using an Electrostatic Powder Spray Process and Filament Winding, "Polymer and Polymer Composites, Vol. 4, No. 5, pp. 325-334, 1996.
|