|
 |
|
Paslode - Cordless Finish Nailer
The Need
|
The
short length (11.75"), better balance and textured super-grip handles of cordless
nailer
allow a user to be able to work comfortably in cramped overhead and other hard-to-reach
places and units can be used for:
- Door Jambs
- Door Stop
- Base Shoe
- Baseboard Molding
- Chair Rails
- Paneling
- Window Casings
- Crown Molding
- Cabinetry
- Pick-Up and Service Work
|
|
The Technology
|
The Paslode Impulse IM250 II features patented linear combustion
engine that is powered by Impulse fuel cells and rechargeable batteries. The nailer fires
approximately 2,500 fasteners per fuel cell and 4,000 nails per battery charge.
The cordless finish nailer drives 16-gauge, smooth galvanized
finishing nails ranging in length from 3/4" to 2-1/2". To assure powerful, yet
precise and delicate nailing, the unit features adjustable depth of drive and no-mar work
contact tips that make exact nail placement easy without damaging expensive wood trim. |
|
Features of the Impulse IM250 II include:
- A quick, top-loading nail magazine and a high-visibility
load rail that allows the user to check nail supply at a glance.
- A convenient hard-sided carrying case includes an AC battery
charger, an easy-to- follow owner's manual and safety glasses plus storage areas for
additional fuel and fasteners.
- A handle-mounted belt hook for right or left-handed
operation that frees the user's hands to position wood.
Specification
- Weight: 5.5 lbs.
- Height: 12 1/2 in.
- Cycle Rate: 2-3 nails/second
- Nail Capacity: 100 (2 Strips)
- Fuel Cell Life: 2,400 nails (approx.)
- Battery Cell Life: Per charge 4,000 nails (approx.)
Reader can download Schematic information
and also refer all
fasteners for Paslode product and fastener code compliance
letter. |
The Benefits
|
- Fast Set-Up - No hoses, no compressors
- No-Mar Tip - Prevents damage to wood surface
- Quick-Clear Feature-Provides easy access to nose should nail
jam occur
- Versatile - Drives 3/4" to 2 1/2" finish
nails
- Adjustable Depth of Drive - Provides control of nail setting
depth
- Weighing only 5.5 pounds
|
Status
|
Paslode, a division of Illinois Tool works, is
a leading manufacturer of cordless and pneumatic nailers, staplers and trim tools, and
nails and staples. The company's products are widely used on the construction job site for
framing and sheathing, trim and finish applications, fencing, floor and roof decking,
siding and insulation, as well as by DIYers and home remodelers. |
Barriers
|
Not recommended for use at altitudes above 5,000
feet, or in temperatures
below 20.F/-7.C. |
Points of Contact
- Paslode, 888 Forest Edge Dr. Vernon Hills, IL 60061. Tel:
(847) 634-1900, Fax: (847) 634-6602, Customer Service: 800-682-3428, Technical Help:
800-222-6990, E-Mail: tech@paslode.com: Technical
Help, webmaster@paslode.com: Everything Else.
References
- Paslode Co. <http://www.paslode.com/>
Disclaimer Statement
|
Neither the Construction
Industry Institute nor Purdue University in any way endorses this
technology or represents
that the information presented can be relied upon without further investigation. |
SL32
|
